Network Device Hardening Checklist for Switches, Routers and Wi-Fi

Network Device Hardening Checklist for Switches, Routers and Wi-Fi

Switches, routers and wireless access points sit at the centre of every office network. They’re usually installed once, configured just enough to work, and then forgotten. Default passwords, old firmware and open management interfaces make them an easy target, and an attacker who controls a network device can see or redirect everything that passes through it.

This checklist applies to managed switches, routers and Wi-Fi systems from vendors such as Cisco, HPE Aruba, Ubiquiti UniFi, Netgear, TP-Link Omada, MikroTik, Juniper and Fortinet. For the firewall itself, see our separate firewall hardening checklist.

1. Inventory and firmware

1. Keep an inventory

List every network device with its model, location, IP address, firmware version and support status. You can’t secure devices you don’t know about. Unmanaged “desk switches” and old Wi-Fi routers plugged in by staff are common blind spots.

2. Update firmware regularly

Check the vendor’s security advisories at least monthly and apply updates during a maintenance window. Many network device vulnerabilities allow remote takeover without a password.

3. Replace end-of-life equipment

Devices past end of support don’t get security fixes. Budget to replace them.

2. Management access

4. Change default credentials

Replace default usernames and passwords on every device. Use unique, long passwords stored in a password manager.

5. Use individual admin accounts

Where possible, connect device logins to RADIUS or TACACS+ with individual accounts, or use the vendor’s cloud controller with named users and MFA. Shared admin passwords make changes untraceable.

6. Use secure management protocols only

  • Use SSH and HTTPS
  • Disable Telnet, HTTP and TFTP management
  • Use SSH version 2 only

7. Restrict management to a management network

Put device management interfaces on a separate management VLAN, and only allow admin workstations or a jump host to reach them. Never expose switch or access point management to the internet.

8. Set a login banner, idle timeouts and lockouts

Log out idle sessions after a few minutes, and lock out repeated failed logins.

3. Services and protocols

9. Disable unused services

Turn off services you don’t need, such as HTTP server, UPnP, Cisco Smart Install, CDP/LLDP on user-facing ports, and any discovery or cloud features you don’t use.

10. Use SNMPv3 or disable SNMP

SNMPv1 and v2c send community strings (effectively passwords) in clear text, and defaults like public and private are widely abused. Use SNMPv3 with authentication and encryption, or turn SNMP off.

11. Synchronise time with NTP

Accurate time makes logs useful during an investigation. Point devices to your internal NTP server or trusted public NTP servers.

4. Switch ports and VLANs

12. Shut down unused ports

Disable switch ports that aren’t in use, or put them in an unused “parking” VLAN. This stops someone plugging into a spare port in a meeting room.

13. Separate traffic with VLANs

Use separate VLANs for staff devices, servers, VoIP phones, printers and IoT, guest Wi-Fi and management. Control traffic between them with firewall rules. See our network hardening guide.

14. Don’t use VLAN 1 for user traffic

Change the native VLAN on trunk ports to an unused VLAN and avoid putting users or management on VLAN 1.

15. Turn on port security features

Depending on your switches:

  • DHCP snooping stops rogue DHCP servers
  • Dynamic ARP inspection blocks ARP spoofing
  • Port security or 802.1X limits which devices can connect
  • BPDU guard on user ports prevents loops and rogue switches
  • Storm control limits broadcast floods

5. Wireless

16. Use WPA3 or WPA2-Enterprise

  • Use WPA3-Personal (or WPA2/WPA3 mixed mode for older devices) with a long passphrase for small offices
  • Use WPA2/WPA3-Enterprise with individual logins (802.1X/RADIUS) where you can, so leavers lose access when their account is disabled
  • Disable WPS and WEP/TKIP

17. Isolate guest Wi-Fi

Put guests on a separate network with client isolation, internet-only access and no route to internal systems. Change the guest password regularly.

18. Watch for rogue access points

Many Wi-Fi controllers can detect unknown access points broadcasting nearby or connected to your network. Turn this feature on and investigate alerts.

6. Logging and backups

19. Send logs to a central server

Forward syslog from all devices to a central log server or SIEM. Alert on admin logins, configuration changes and port security violations.

20. Back up configurations

Back up device configurations automatically after every change, and keep copies off the device. If a switch fails or is compromised, you can restore it quickly.

Network device hardening checklist (summary)

AreaCheck
InventoryAll devices listed with firmware and support status
FirmwareUpdated monthly; end-of-life devices replaced
Admin accessDefaults changed; individual accounts; SSH/HTTPS only; management VLAN
ServicesUnused services off; SNMPv3 or SNMP off; NTP on
Switch portsUnused ports off; VLANs; no user traffic on VLAN 1
Port securityDHCP snooping, ARP inspection, 802.1X or port security, BPDU guard
WirelessWPA3 or WPA2-Enterprise; WPS off; guest isolated; rogue AP detection
OperationsCentral logging and alerts; automatic config backups

Network devices rarely get attention until something breaks. A couple of hours working through this list closes the gaps attackers look for first.